7. Turn your device back ON and confirm if the remote correctly controls the
other main functions (Volume, Play, Pause, Menu, Directional Arrow
Buttons, etc.) for your device
8. If the remote is not controlling the main functions of the device repeat
Steps 1-6 until you find another code which turns your device OFF.
• NOTE: When your device turns OFF for the first time do not press
the SET button. Instead wait until your device turns back ON. This
will indicate another successful code has been found.
CODE RETRIEVAL
Once you have programmed the remote to control all of your devices, you may
want to record the codes at the end of this manual for future reference.
• If you used the Manual Code Entry method just find the codes you entered
and make a note of them in the boxes below.
• If you used one of the Code Search methods to program the remote, or if
you do not remember the code you used during Manual Code Entry, you
will need to retrieve each device’s four-digit code.
o NOTE: Retrieving and noting the four-digit codes will allow you to
use the Manual Code Entry method. This will save a lot of time in
the future if you ever need to re-program the remote.
RETRIEVING THE FOUR-DIGIT CODES AUTOMATICALLY PROGRAMMED
1. Press the Device button (TV, DVD, VCR, etc.) for device you wish to
retrieve. The Indicator Light will flash once.
2. Press & Hold both the SET & INPUT buttons. Release both buttons when
the Indicator Light on the POWER button starts flashing.
3. The Indicator Light will indicate the numbers of the current four-digit code
by flashing a specific number of times for each number of the code. The
Indicator Light will stop flashing for 1 second to separate each number of
the four-digit code.
• EXAMPLE:
o Indicator Light flashes 4 times (then stops flashing for 1 second)
o Indicator Light flashes 8 times (then stops flashing for 1 second)
o Indicator Light flashes 3 times (then stops flashing for 1 second)
o Indicator Light flashes 10 times (then stops flashing for 1
second)
o The current code for this device is: “4830”
To Next Page
Loading...
Need help?
General