Viotek GNV34DBE2 User Manual

9
Section 6: Basic Operation
1. Insert one end of the DisplayPort (DP) cable into your PC’s graphics card. An
HDMI cable (not included) can also be used. A DP cable is included for your
convenience.
2. Connect the other end of the cable to the corresponding port on your monitor.
Audio Connector HDMI Ports
Power Connector
DP Ports
3. Connect the power cable to your monitor then connect the other end to your
power source. It is recommended that you use a surge protector with adequate
voltage if a wall outlet cannot be reached directly.
4. Locate the power button on the monitor and press it to turn the monitor on.
VIOTEK Adaptive Sync
Adaptive sync eliminates image tearing, stuttering and ghosting by adjusting the
monitor’s vertical refresh rate to the frame rate of the graphics card. It is compatible
with GPUs that use AMD® FreeSync™ or NVIDIA® G-Sync™. The feature is off
on VIOTEK monitors by default and must be manually enabled in the monitor’s
OSD (see Section 8: OSD). To use this feature, the connecting device must be
compatible with adaptive sync (FreeSync and/or G-Sync); have the latest graphic
drivers; and be connected to the monitor using a DisplayPort (DP) cable.
Section 7: Indicator Light
Indicator Light
Solid blue light indicates power is on and the monitor is operating normally. Flashing
blue light indicates no video source, no horizontal or vertical signal has been
detected or voltage is low. Please ensure your computer is on and all video cables
are fully inserted and/or connected.

Viotek GNV34DBE2 Specifications

General

Color	black
Screen Type	lcd
Tiltable	yes
Wall Mount	75mm x 50mm
Webcam	no
OS Compatibility	linux, mac, windows, not applicable
Screen Size	34 inches
Panel Type	va
Aspect Ratio	21:9
Resolution	3440 x 1440
Refresh Rate	144hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	4 milliseconds
Brightness	350 candela per square meter
Contrast Ratio	1, 000, 000:1
Synchronization	freesync (amd adaptive sync)
HDR	no
Built-In Speakers	no
Interface Connectors	2 x displayport 1.4
HDMI Ports	2
Display Port Inputs	2
Depth with Stand	8.88 inches
Height with Stand	17.88 inches
Width with Stand	31.83 inches
Net Weight without Stand	15.47 pounds