13
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing
mode automatically.
1 Press the SOURCE button on the main unit or on the remote control repeatedly to select
Bluetooth mode, the Bluetooth Indicator will flash slowly. The unit is now in pairing mode.
2 Activate your Bluetooth device and select the search mode. “SB-1900P” will appear on your
Bluetooth device list.
- If you cannot find the soundbar, press the "PAIR" button on the remote control or press and
hold the
BF
/PAIR button on the unit. You will hear “Pairing“ from the unit and the Bluetooth
Indicator will flash rapidly.
3 Select “SB-1900P” in the pairing list. After the “Paired” voice prompt, the system is successfully
connected and and the Bluetooth Indicator will light up steadily.
4 Play music from the connected device.
To disconnect the Bluetooth function, you can :
- Switch to another function on the unit.
- Disable the function from your Bluetooth device. The Bluetooth device will be disconnected from
the soundbar after the “Disconnected” voice prompt.
- Press the "PAIR" button on the remote control or press and hold the
BF
/PAIR button on the unit.
Tips:
- Enter 0000 for the password if necessary.
- If there is an existing connection, press the "BT PAIR" button on the remote control to re-activate
the pairing mode, the connection will be interrupted.
- If no other Bluetooth device pairs with this player within two minutes, the player will recover its
previous connection.
- The player will also be disconnected when your device is moved beyond the operational range.
- If you want to reconnect your device to this player, place it within the operational range.
- If the device is moved beyond the operational range, when it is brought back, please check if the
device is still connected to the player.
- If the connection is lost, follow the instructions above to pair your device to the player again.
Listen to Music from Bluetooth Devices
- If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can
listen to the music stored on the device through the player.
- If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player's
remote control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the
BF
/PAIR button on the unit or the
BF
button on the remote
control.
- To skip to a track, press the I
/
I
buttons on the remote control.
To Next Page
Loading...
Need help?
General
