Chapter 5. Bundled Software Installation Guide
5.1. Hardware Installation
1. Connect the male connector of UPSilon2000 cable to the UPS
communication port.
2. Connect the female connector of UPSilion 2000 cable to a dedicated
RS232 port. If there is only a DB25 connector of the RS232 port available,
you may use a DB9-DB25 adapter to convert it.
5.2. Software Installation
5.2.1. UPSilon2000 Installation
A. UPSilon2000 for Windows 95, 98, NT, 2000, XP
1. From the Start Button, choose "Run".
2. Type D:\Windows\Setup.exe
3. Choose OK.
B. UPSilon2000 for Novell Netware V3.1x
1. Login the File Server (with access rights in SYS: SYSTEM)
2. Execute D:\Netware\V3.1x\Install.exe
3. Re-boot System.
C. UPSilon2000 for Novell Netware V4.x
1. Login the File Server (with access rights in SYS: SYSTEM)
2. Execute D:\Netware\V4.x\Install.exe
3. Re-boot System
D. UPSilon2000 for Novell Netware V5.x
1. Login the File Server (with access rights in SYS: SYSTEM)
2. Execute D:\Netware\V5.x\Install.exe
3. Re-boot System
To Next Page
Loading...
Need help?
General
