12 13
TF20
ONLY
TF40
ONLY
BOLT (A)
20 mm
Qty: 6
SPRI NG
WASHER (B)
8.2 mm
Qty: 6
ARC
WASHER (C)
8.4 mm
Qty: 6
SCREW (M)
20 mm
Qty: 2
SCREW (N)
12 mm
Qty: 4
BOLTS (A)
SPRI NG WASHERS (B)
LEFT CONSOLE MAST
LEAD WIRE
CONSOLE CABLE
SCREWS (N)
ARC WASHERS (C)
BASE FRAME
SCREW (M)
BASE FRAME COVER
RIGHT CONSOLE MAST
TF40 ASSEMBLY STEP 1
NOTE: This step is for TF40 models only.
A Open hardware for step 1.
B Slide base frame covers over base frame.
Attach base frame covers using 2 screws
(m) and 4 screws (n).
C Attach lead wire to console cable and pull
lead wire through right console mast. After
pulling the lead wire through the mast, the top of
the console cable should be located at the top
of the mast. Detach and discard lead wire.
D Attach console mast to base frame using 3
bolts (a), 3 spring washers (b) and 3 arc
washers (c).
E Repeat step C on other side.
NOTE: Do not tighten bolts until step 4 is complete.
NOTE: Do not pinch console cable when placing
the mast onto the base frame.
TF40 ONLY
TF40 HARDWARE FOR STEP 1 :
BOLT (A)
20 mm
Qty: 6
SPRI NG
WASHER (B)
8.2 mm
Qty: 6
ARC
WASHER (C)
8.4 mm
Qty: 6
BOLTS (A)
SPRI NG WASHE RS (B)
LEFT CONSOLE MAST
LEAD WIRE
CONSOLE CABLE
ARC WASHERS (C)
BASE FRAME
BASE FRAME COVER
RIGHT CONSOLE MAST
TF20 ASSEMBLY STEP 1
TF20 ONLY
TF20 HARDWARE FOR STEP 1 :
NOTE: This step is for TF20 models only.
A Open hardware for step 1.
B Slide base frame cover up right console
mast. Attach lead wire to console cable
and pull lead wire through right console
mast. After pulling the lead wire through the
mast, the top of the console cable should be
located at the top of the mast. Detach and discard
lead wire.
NOTE: Do not pinch console cable when placing the
mast onto the base frame.
C Place right console mast over base frame.
D Attach console mast to main frame
bracket using 3 bolts (a), 3 spring
washers (b) and 3 arc washers (c).
NOTE: Do not tighten bolts until step 4 is complete.
E Slide base frame cover up left console
mast. Repeat STEP D to attach left console
mast.
F Slide base frame covers down.
To Next Page
Loading...
General