EasyManuals Logo
Home>Vision>Treadmill>TF40

Vision TF40 User Manual

Vision TF40
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
22 23
LIMITED HOME-USE WARRANTY
WEIGHT CAPACITY
T40 = 400 lbs (182 kilograms)
TF40 = 400 lbs (182 kilograms)
TF20 = 375 lbs (170 kilograms)
FRAME
Warranty on the frame against defects in workmanship and
materials for the period specified on the warranty policy from the
date of original purchase, so long as the device remains in the
possession of the original owner. (The frame is defined as the
welded metal base of the unit and does not included any parts
that can be removed.)
DRIVE MOTOR/ELEVATION MOTOR
Warranty on the drive/elevation motors against defects in
workmanship and materials for the period specified on the
warranty policy from the date of original purchase, so long as the
device remains in the possession of the original owner. Labor or
installation of motor is not covered under the motor warranty.
ELECTRONICS & PARTS
Warranty on the electronic components, finish and
all original parts for the period specified on the
warranty policy from the date of original purchase,
so long as the device remains in the possession of
the original owner.
LABOR
Warranty shall cover the labor cost for the repair of
the device for the period specified on the warranty
policy from the date of the original purchase, so
long as the device remains in the possession of the
original owner.
NOTE: For further information on the warranty period, please
refer to the warranty policy along with the equipment.
BOLT (L)
20 mm
Qty: 4
BOLT (M)
20 mm
Qty: 6
ASSEMBLY STEP 6
HARDWARE FOR STEP 6 :
CONSOLE BASE
BOLTS (L)
CONSOLE BASE COVER
HANDLEBAR
BOLTS (M)
WATER BOTTLE HOLDER
A Open hardware for step 6.
B Attach the console base cover to the
console base using 4 bolts (l).
C Attach water bottle holder and
accessory holder to left and right
handlebars using 6 bolts (m).
ASSEMBLY COMPLETE!
This treadmill has a pre-waxed belt and
should never be lubricated. Waxing
the belt can cause damage that is not
covered by the warranty.
IMPORTANT
ALL
MODELS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vision TF40 and is the answer not in the manual?

Vision TF40 Specifications

General IconGeneral
BrandVision
ModelTF40
CategoryTreadmill
LanguageEnglish