VIVAX ENG
12
STAND INSTALLATION
Notes
- The TV screen is very fragile, and must be protected at all times when removing the
base stand. Be sure that no hard or sharp object, or anything that could scratch or
damage the screen, come into contact with it. DO NOT exert pressure on the front of
the TV at any time because the screen could crack.
- For tabletop use, the TV must be attached to the provided stand as shown on this page.
- Product images are only for reference, actual product may vary in appearance
WARNING! Be sure to disconnect the AC power cord before
installing a stand or wall-mount brackets.
CAUTION!
Carefully place your TV facedown on a soft,cushioned surface to prevent damage to the TV
or scratching to the screen.
Follow the illustrations and textual instructions below to complete the installation steps:
1. Attach the stand to the TV set as shown in the picture.
2. Use the screws (M4x12) to fix the stand tightly.
To Next Page
Loading...
Need help?
General
