1
INSTALLING THE TV
After removing the TV from the box and inspecting the package
contents you can begin installing the TV. Your TV can be installed in
two ways:
• 2QDȵDWVXUIDFHXVLQJWKHLQFOXGHGVWDQG
• On a wall, using a VESA-standard wall mount (not included)
Installing the TV Stand
Your TV includes a stand designed to support the weight of the TV
and keep it from falling over. However, the TV can still fall over if:
• It is placed on an uneven, unstable, or non-level surface
• It is pushed, pulled, or otherwise improperly moved
• If an earthquake occurs and the TV is not properly secured
3ODFHWKH79VFUHHQGRZQRQDFOHDQȵDWVXUIDFH7RSUHYHQW
scratches or damage to the screen, place the TV on a soft surface,
such as carpet, rug, or blanket.
To install the stand:
1. Insert the left and right stands into the base of the TV (the stands are identical).
2. Secure each stand to the TV with two (2) M4 Phillips screws (included). Insert the screws into the back of
the TV and tighten them using a Phillips screwdriver.
:KHQ\RXDUHȴQLVKHGSODFHWKH79RQDVWDEOHOHYHOVXUIDFH
Note:b7KHLPDJHVKRZQKHUHLVIRULOOXVWUDWLYHSXUSRVHVRQO\DQGPD\EHVXEMHFWWRFKDQJHb
The actual number of ports and their locations may vary, depending on the model.
8
To Next Page
Loading...
Need help?
General
