5
28
Creating a Custom Picture Mode
Custom picture modes allow you to save a group of custom
settings for various viewing conditions and video sources.
When changes are made while a preset picture mode is selected,
an asterisk appears after the name of the picture mode. These
settings can be saved as a new custom picture mode and the
preset mode can be reset to its default settings.
A custom picture mode only applies to the input
(HDMI-1, HDMI-2, COMP, AV, etc.) in use when it was
created. Each input can have up to six custom
picture modes.
To create a custom picture mode:
1. Set the Picture Mode to an
existing custom setting. See
Adjusting the Picture Settings
on page 22.
2. From the PICTURE menu, use
the Arrow buttons to highlight
Picture Mode Edit and press
OK. The PICTURE MODE EDIT
menu is displayed.
3. On the PICTURE MODE EDIT
menu, select Save Picture
Mode. The
SAVE PICTURE MODE menu is
displayed.
4. Use the Arrow buttons to enter
a custom name using the
on-screen keyboard.
5. Highlight Done and press OK.
6. Press the EXIT button to exit the
menu screens.
To show or hide the Ramp Test Pattern:
1. Ensure that you are on an input that is displaying active
content. From the Color Tuner menu, use the Arrow buttons
to highlight Color Tuner, and then press the Left/Right Arrow
buttons until the Ramp Test Pattern menu is displayed.
2. Use the Arrow buttons on the remote to highlight Off. Use
the Left/Right Arrow buttons to select the color for the ramp
test pattern. Selecting a color immediately shows that color
ramp.
—or—
To hide the Ramp Test Pattern, use the Left/Right Arrow
buttons to highlight Off.
3. When you are finished, press the BACK button to adjust
additional settings or EXIT.
Ramp Test Pattern
Off
To Next Page
Loading...
Need help?
General
Weight and Dimensions
