4Playing USB Media
Preparing Your USB Drive to Play USB Media
To display USB media, you must rst save your videos onto a USB
thumb drive:
• The USB thumb drive must be formatted as FAT32.
• Files on the USB thumb drive must end in a supported le
extension (.mp4).
• The player is not designed to play media from external hard
drives, MP3 players, cameras, or smartphones.
Displaying USB Media
To display your USB media:
1. Connect your USB thumb drive to the USB port on the side of
the TV.
2. The TV will recognize the USB stick. Use the arrow keys on the
remote to select the content you’d like to play.
-OR-
Select USB from the bottom streaming icons on the SmartCast
Homepage.
Removing the USB Drive from the TV
To safely remove your USB drive from the TV:
1. Turn o the TV.
2. Disconnect your USB thumb drive from the USB port on the
side of the TV.
Playing USB Media
Connect a USB thumb drive to your TV to play videos.
Note:
The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.
You can display your photos in fullscreen. Select the
photo, press OK, then highlight Fullscreen and press
OK.
Do not remove the USB thumb drive while the TV is on.
Doing so may damage the drive.
38
To Next Page
Loading...
Need help?
General
