6 | EC declaration of conformity
according to the EC Machinery Directive 2006/42/EC, Annex IIA
We hereby declare that the device specied below, on account of its design and construction and in the version marketed by us,
corresponds to the applicable fundamental health and safety requirements of the EC Machinery Directive. If this device is a part that
isinstalled in other machines or similar, we hereby point out that our device may only be put into operation after ensuring that this
higher-level machine also meets the requirements of the aforementioned directive. Changes to the machine or device which have
notbeen coordinated with us invalidate this declaration.
Machine designation: Mounting
Machine type: VAS6131/19
Intended use: Lifting high-voltage batteries up to 900kg max.
Applicable EC directives: EC Machinery Directive (2006/42/EC)
Applied harmonized standards: DIN EN ISO 12100; DIN EN 1494
Applied national standards: DGUV 100-500 Section 2.8
Authorized documentation
representative:
Wolfgang Wiesent, Sollnau 14, 85072 Eichstätt, Germany
Date/manufacturer signature:
25 March 2021
Information about the
undersigned:
Managing Director
Formal requirements:
- Completion in block letters or by machine
- Ocial language of the country of use
- Legally binding signature(s)
- Original for project folder
- Copy for the customer
To Next Page
Loading...
Need help?
General