VOLTCRAFT IPC-1L User Manual

22
7. Operation
a) Power adapter
• Insert the low voltage plug on the power adapter into the power input socket.
• Plug the power adapter into a wall outlet.
• When the power adapter has been connected to the mains, all the display elements will
beshownbriey.The“null”iconwillbedisplayedwhentherearenobatteriesinserted.Ifa
damagedbatteryisinserted,the“null”iconwillalsobedisplayed.
b) Operation modes
The intelligent battery charger provides four different operating modes:
• Chargingmode(CHARGE)
Chargeuptherechargeablebattery,automaticallyswitchtotricklecharge
after rechargeable battery is full.
• Dischargingmode(DISCHARGE)
Discharge the rechargeable battery before charging it for minimizing the
memory effect.
• Refreshmode(REFRESH)
Refresh the rechargeable battery to its maximum capacity by charging
and discharging the rechargeable battery repeatedly. This process may
bring the rechargeable battery back to the optimum condition for old
rechargeable batteries or those have not been used for a long time.
• Testmode(TEST)
Check the rechargeable battery capacity (mAh). The battery capacity
determined in the test mode refers to the capacity being discharged after
fully charged. If the battery capacity is lower than the battery’s rating, the
battery may reach the end of its useful life.

VOLTCRAFT IPC-1L Specifications

General

Brand	VOLTCRAFT
Model	IPC-1L
Category	Battery Charger
Language	English