VOLTCRAFT IPC-1L User Manual

25
f) Test mode
• Pressandholdthe“MODE”button(>1second)andthenselectthetestmodebypressing
the“MODE”buttonagain..
• Press“CURRENT”toselectthechargingcurrent(200,500,700mA).Thedischargingcurrent
(100,250,350mA)ishalfoftheselecteddischargingcurrent.
• Press“DISPLAY”buttontoscrollthroughdifferentdisplays,chargingcurrent(mA),battery
voltage(V),accumulatedcapacities(mAh)ortimeelapsed(hh:mm).
Stage in charging mode Current(mA) Voltage(V)
Capacity
(mAh/Ah)
Time(hh:mm)*
During charging Chargingcurrent
Instantaneous
battery voltage
“---mAh”
Chargingtime
elapsed
During discharging
Discharging
current
“---mAh”
Discharging
time elapsed
During second charging Chargingcurrent
Capacity
determined in
discharging
Second
charging time
elapsed
During trickle charging
Trickle charging
current
Discharging
time elapsed
g) Tickle charging
After the rechargeable battery is fully charged in any of the operating modes, the charger will
send impulse form of current to the rechargeable batteries to maintain the fully charged level.
This mode is automatically launched after rechargeable batteries are fully charged and kept at
thechargingunit.The“Full”iconwillbedisplayedonthedisplay.
*Thetimerwillberesumedandcountedfrom00:00againafterthetimeelapsedislongerthan
20hours.(Forexample,1:45willbeshownafterthebatteryhasbeenrefreshedfor21hrand
45 min.)

VOLTCRAFT IPC-1L Specifications

General

Brand	VOLTCRAFT
Model	IPC-1L
Category	Battery Charger
Language	English