VOLTCRAFT SEM6000 User Manual

17
1. Intended use
The product acts as a power socket and is equipped with a push
button that turns the power supply to attached loads on and off.
An accompanying app controls the product (on/off, timer,
schedule) and displays recorded data. Product and app
communicate via Bluetooth 4.0.
The product is intended only for the connection to a standard
power socket with earth contact. Refer to the technical data
section to learn more about the maximum permissible load.
The product is only designed for indoor use. Keep away from
water and high-humidity sources and the areas where these
conditions occur (e.g. bathroom).
Please read the operating instructions carefully and do not discard
them. If you pass the product on to a third party, please hand over
these operating instructions as well.
Any use other than that described above could lead to damage
to this product and involves the risk of short circuits, re, electric
shock, etc. No part of the product may be modied or recongured!
Please observe the safety instructions at all times!
This product complies with the legal national and European
requirements. All names of companies and products are the
trademarks of the respective owners. All rights reserved.

VOLTCRAFT SEM6000 Specifications

General

Product color	White
LED indicators	Power
Rated voltage	220 - 240 V
Rated frequency	50 Hz
Socket type	Type F
Sockets quantity	1
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	72 mm
Width	55 mm
Weight	90 g