EasyManuals Logo

Volvo Penta IPS 1050 User Manual

Volvo Penta IPS 1050
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
Starting
Make a habit of visually checking the engine, engine bay and transmission before start. This will help you to
discover quickly if anything abnormal has happened, or is about to happen. Also check that instruments and
warning displays show normal values when you have started the engine.
To minimize
cold start smoke we recommend the installation of an engine heater or engine bay heater if temper-
atures below +5°C (41°F) are encountered.
WARNING!
Never use start spray or similar products as starting aid. Explosion risk!
Before Starting
Check the engine and drive units oil level.
Check the coolant level.
Open the sea cock.
Open the fuel cock.
Turn the main switches on.
IMPORTANT!
Never disconnect the current with the main switches
when the engine is running. The alternator and elec-
tronics could be damaged.
Start the engine bay fan, where fitted, and allow it to
run for at least four minutes.
Check there is sufficient fuel for the planned trip.
1
0
P0005851
48 47702096 05-2011

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta IPS 1050 and is the answer not in the manual?

Volvo Penta IPS 1050 Specifications

General IconGeneral
BrandVolvo Penta
ModelIPS 1050
CategoryEngine
LanguageEnglish

Related product manuals