Malfunction message engine and EVC-
system
If the diagnostic function discovers a malfunction, it
warns the driver by showing pop-ups in the tachom-
eter display and the buzzer will sound.
Pop-ups will alternate between "cause of fault" and
"measures to take".
To acknowledge the alarm, press NAVIGATION
WHEEL. When the fault has been acknowledged,
the buzzer will become silent. Press NAVIGATION
WHEEL. The pop-up will disappear and normal display
window will be shown.
NOTE! To enable engine start the alarm must be ac-
knowledged.
Danger pop-up
If the Danger pop-up is shown during operation, a se-
rious fault has occured.
NOTE! Acknowledge the alarm and stop the engine at
once.
Information regarding "cause of fault" and "measures
to take" is found in chapter "Fault register".
Warning pop-up
If the Waring pop-up is shown during operation, a
fault has occured.
NOTE! Acknowledge the alarm and stop the engine at
once.
Information regarding "cause of fault" and "measures
to take" is found in chapter "Fault register".
Caution pop-up
If the Caution pop-up is shown during operation, a
fault has occured.
Acknowledge the alarm.
Information regarding "cause of fault" and "measures
to take" is found in chapter "Fault register".
To Next Page
Need help?
General
