Flooded Engine
21181
51810a
51813
To clear a flooded engine:
1. Turn the key to ON I (RUN).
2. On the single side mount remote control, press
and release the Throttle Only (N) button A, then
move the control lever forward to the shift posi-
tion.
On the twin top mount remote control, press and
release the Throttle Only button 13, then move
the control lever forward to the shift position.
3. Move the remote control lever to FULL THROT-
TLE.
4. Turn the ignition switch to START II. If the engine
does not start, then try again.
NOTICE! After a second attempt, if the engine
still does not start, return the control lever to the
neutral position and try a normal engine start.
5. As soon as the engine starts:
● Return the lever to IDLE (NEUTRAL).
● Return the key to ON or RUN I.
NOTICE! Immediately after engine start-up, look at all
instruments. If any readings are abnormal, stop the
engine and determine the cause.
Starting
47701898 12-2010 67