EasyManuals Logo

Volvo Penta TAD1170VE User Manual

Volvo Penta TAD1170VE
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
Starting
Make it a habit of giving the engine and engine room a visual check before starting. This will help you to discover
quickly if anything abnormal has happened, or is about to happen.
Also check that instruments and warning displays show normal values after you have started the engine.
WARNING!
Never use start spray or similar agents to start an engine. This may cause an explosion in the inlet manifold. Risk
of personal injury.
Before Starting
Check that the oil level is between the MIN and MAX
marks. Refer to Oil level, checking and topping up.
Check the fuel pre-filter; refer to Draining
condensate, fuel system, page 63.
Check that no leakage of oil, fuel or coolant is
present.
Check the coolant level and that the radiator is not
blocked externally. Refer to Coolant Level,
Checking and Topping Up, page 69 and Charge
Air Cooler, External Cleaning, page 70.
WARNING!
Do not open the coolant filler cap when the engine
is hot, except in emergencies, as this could cause
serious personal injury. Steam or hot fluid could
spray out.
Turn the main switch on.
IMPORTANT:
Never break the circuit with the main switch while
the engine is running.
Alternator and electronics could be damaged.
Move the engine speed control to idle, and open the
disengageable clutch/gearbox if installed.
47710925 01-2019 © AB VOLVO PENTA 37

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta TAD1170VE and is the answer not in the manual?

Volvo Penta TAD1170VE Specifications

General IconGeneral
BrandVolvo Penta
ModelTAD1170VE
CategoryEngine
LanguageEnglish

Related product manuals