Display Control Unit
The Volvo Penta DCU II instrument panel
communicates with the engines control unit and has a
number of functions as control, monitoring and
diagnostics.
NOTICE! Settings and the type of engine data
presented on the display may vary depending on the
installation and engine model.
Depending on the installation the DCU II can also be
used as presentation display only.
NOTICE! The menus and illustrations shown here are
the English version. Refer to the section Settings to
change the display language.
Turn On/Off the ignition
Start the engine
Reduce engine rpm
Increase engine rpm
Stop the engine
Scroll upwards in menus
Select and confirm in menus
Scroll downwards in menus
Return to previous menu selection
Instruments and Controls
47710925 01-2019 © AB VOLVO PENTA 33
To Next Page
Loading...
Need help?
General
