EasyManuals Logo

Volvo Penta TAD873VE User Manual

Volvo Penta TAD873VE
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
Engine Oil, Change
WARNING!
Hot oil and hot surfaces can cause burns.
NOTICE! Always follow the recommended oil change
interval and always change the oil filter in connection
with oil changes. Refer to Oil Grade and Oil Change
Interval.
1
Run the engine until warm.
2 Remove the drain plug. Drain the oil.
NOTICE! Collect the old oil and old filters and hand
them to a re-cycling station.
3 Install the drain plug with a new gasket.
4 Change the oil filter, refer to Oil Filter,
Replace, page 58.
5 Fill oil to the correct level, refer to Oil level, checking
and topping up, page 58.
IMPORTANT:
Do not fill above the MAX level.
6
Start the engine and let it idle. Check that the oil
pressure is normal.
7 Stop the engine. Check that there is no oil leakage
around the filters. Check the oil level and top up with
oil as necessary. Refer to Oil level, checking and
topping up, page 58.
Maintenance
60
47711083 09-2018 © AB VOLVO PENTA

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta TAD873VE and is the answer not in the manual?

Volvo Penta TAD873VE Specifications

General IconGeneral
BrandVolvo Penta
ModelTAD873VE
CategoryEngine
LanguageEnglish

Related product manuals