EasyManuals Logo

Volvo Penta TAD873VE User Manual

Volvo Penta TAD873VE
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
Coolant Level, Checking and
Topping Up
WARNING!
Do not open the coolant filler cap when the engine is
hot,
except in emergencies as this could cause serious
personal injury. Steam or hot fluid could spray out.
Coolant filling must be preformed with the engine
stopped. Check the coolant level daily before starting.
IMPORTANT:
Only use coolant recommended by Volvo Penta.
Top up with the same type of coolant as already used
in the system.
Different types of coolant must not be mixed.
1
Only open the filler cap (1). Do not open the
pressure cap.
2 Check that the coolant level is above the MIN mark
on the expansion tank.
3 Top up with coolant as required, so that the level is
between the MIN and MAX marks. Fill slowly, to
allow air to flow out.
Maintenance
66
47711083 09-2018 © AB VOLVO PENTA

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta TAD873VE and is the answer not in the manual?

Volvo Penta TAD873VE Specifications

General IconGeneral
BrandVolvo Penta
ModelTAD873VE
CategoryEngine
LanguageEnglish

Related product manuals