Volvo D9 User Manual

Power-up sequence
To power up the EMS, the ignition pin in the engine
connector must be connected to battery + (system
voltage). The EMS will then activate the Power Mod-
ule, acting as a main relay, and hold the power until
the power-down sequence is finished.
The engine management system will power up within
one second of ignition being switched on.
Bus interface
Associated input:
OEM interface connector pin 5 – ignition.
Engine control interface, Power-up sequence
12 47706587 05-2015 © AB VOLVO PENTA

Volvo D9 Specifications

General

Engine Type	Diesel
Cylinders	6
Displacement	9.4 liters
Torque	1050-1700 Nm depending on specific model
Configuration	Inline
Aspiration	Turbocharged
Cooling System	Liquid-cooled