Volvo D9 User Manual

Stop
There are two different ways to request engine stop:
1. Stop request on CAN
The 'Stop request' signal is sent on CAN in the VP70
message and results in instant engine stop.
This is the standard method to initiate engine stop.
2. External stop interface
For D9 and D16 engines, Normally Open are default:
External stop is triggered by the pins closure.
On D13 this can be set as Normally Open or Normally
Closed using the aftermarket tool (VODIA).
Bus interface
Associated signals:
BB1: Rx: VP70 'Stop request'
Engine control interface, Stop
14 47706587 05-2015 © AB VOLVO PENTA

Volvo D9 Specifications

General

Engine Type	Diesel
Cylinders	6
Displacement	9.4 liters
Torque	1050-1700 Nm depending on specific model
Configuration	Inline
Aspiration	Turbocharged
Cooling System	Liquid-cooled