18
REAR PANEL
REAR PANEL SECTION
7.1 Valve
ToneLab LE contains a 12AX7 (ECC83) valve (“vacuum tube”).
NOTE: The valve cover or the valve may break if either is subjected to impact.
If the valve cover breaks, please have it replaced. Failure to replace a damaged valve cover
may lead to the valve itself becoming damaged.
7.2 STANDBY switch
Tur ns the power on/off.
7.3 ~AC9V
Connect the included AC/AC power supply here.
7.4 INPUT jack
Connect your guitar to this jack.
7.5 INSERT jacks (SEND, RETURN)
You can connect an external effect processor or stompbox to these jacks.
Connect SEND to the input of your external effect device.
Connect RETURN to the output of your external effect device.
7.6 OUTPUT jacks (L/MONO, R)
These are analog output jacks. If you’re using a mono output, connect the L/MONO jack.
7.7 LEVEL knob
Adjusts the output level from the OUTPUT jacks and the HEADPHONES jack.
7.8 HEADPHONES jack (stereo)
Connect your headphones to this jack.
7.9 MIDI OUT connector
This connector transmits MIDI data. Use it when you want to control a connected external
MIDI device.
7.10 MIDI IN connector
This connector receives MIDI data. Use it when you want to control ToneLab LE from a con-
nected external MIDI device.
7.11 S/P DIF OUT connector
This connector transmits S/P DIF optical digital data.
7
7.4 7.5 7.6
7.7
7.1
7.8 7.11
7.2
7.3 7.107.9
To Next Page
Loading...
Need help?
General
