VTech IS8151-1S User Manual

3
20 – 1
• While reviewing a caller ID log entry, press repeatedly to
add or remove 1 in front of the telephone number before
dialing or saving it in the phonebook.
• Press and hold to set or to dial your voicemail number.
TONE
• Press to switch to tone dialing temporarily during a call if you
have pulse service.
• While entering names, press to change the next letter to
upper or lower case.
QUIET #
• Press and hold to enter the QUIET mode setting screen, or
to deactivate QUIET mode.
Handset overview
1 – LCD display
2 – VOICE
• Press to activate the voice-controlled application of
connected cell phone.
3 – PUSH TO TALK
• Press to initiate a one-to-one or one-to-group broadcast.
• Press and hold to broadcast to a group of system devices.
4 – Softkeys (2)
• Press to select the menu item displayed above the key
• While in a menu, press to select an item, save an entry or
setting, cancel an operation, or back up to the previous
menu.
5 – CELL 1 / CELL 2
• Press to make or answer a cell call.
• During a cell call, press to answer an incoming CELL 1/2 call
when you hear a call waiting alert.
• During message playback, press to call back the caller if the
caller’s number is available.
6 – / pVOLUME
• Press to show phonebook entries when the handset is not in
use.
• Press to scroll up while in menus.
• While entering names or numbers, press to move the cursor
to the right.
CID / qVOLUME
• Press to show caller ID log when the handset is not in use.
• Press to scroll down while in menus.
• Press to decrease the listening volume when on a call or to
decrease the message playback volume.
• While entering names or numbers, press to move the cursor
to the left.
7 – OFF / CANCEL
• During a call, press to hang up.
• While in a menu, press to cancel an operation, back up to
the previous menu, or exit the menu display; or press and
hold this button to exit to idle mode.
• When the handset is ringing, press to mute the ringer
temporarily.
• Press and hold while the telephone is not in use to erase the
missed call indicator.
8 – QUIET #
• Press to display other dialing options when reviewing a
caller ID log entry.
• Press and hold to enter the QUIET mode setting screen, or
to deactivate QUIET mode.
9 – CALL BLOCK
• Press to block the incoming call when the telephone is
ringing.
• When on a call, press to block the call.
• When the handset is not in use, press to show the call block
menu.
10 – REDIAL / PAUSE
• Press to review the redial list.
• Press and hold to insert a dialing pause while entering a
number.
11 – CHARGE light
• On when the handset is charging in the telephone base or
charger.
12 – HOME / FLASH
• Press to make or answer a home call.
• During message playback, press to call back the caller if the
caller’s number is available.
• During a call, press to answer an incoming home call when
you receive a call waiting alert.
13 – 1
• While reviewing a caller ID log entry, press to add or
remove 1 in front of the telephone number before dialing or
saving it in the phonebook.
• Press and hold to set or to dial your voicemail number.
14 – TONE
• Press to switch to tone dialing temporarily during a call if you
have pulse service.
• While entering names, press to change the next letter to
upper or lower case.
15 –
• Press to make or answer a home or cell call using the
speakerphone.
• Press to switch between the speakerphone and the handset.
2
5
7
6
8
9
10
17
1
3
4
16
15
14
11
12
13

VTech IS8151-1S Specifications

General

Brand	VTech
Model	IS8151-1S
Category	IP Phone
Language	English