What’s in the box
Connect and power on - Baby unit Connect and power on - Parent unit
VM3252-2 baby monitor system
Baby’s room Living room
Go to www.vtechphones.com
to register your product for
enhanced warranty support
and latest VTech product news.
VM3252-2
Quick start guide
Install the battery
＜3ft (1m)
＞3ft (1m)
THIS SIDE UP
Positioning - Baby unit
Once you power on both your baby unit and parent unit, your parent unit displays image from
the baby unit, and the LINK LED light turns on. The POWER LED light of the baby unit also
turns on.
Status check
Overview - Parent unit
Stand
Power jack
Speaker
VOL
-
VOL
+
Overview - Baby unit
Camera
Microphone
Light sensor
Infrared LEDs
Speaker
ON/OFF switch
POWER LED light
CAUTION
• The default volume of your parent unit is
level 4, and the maximum volume is level
5. If you experience high-pitched screeching
noise from your baby monitor while
positioning:
- Make sure your baby unit and parent unit
are more than 3 feet (1 meter) apart, OR
- Turn down the volume of your parent unit.
If you are viewing baby unit , the POWER LED light turns on. As baby unit is not being
viewed, its POWER LED light flashes.
Wall mount holes
Long press
On/off
TALK
Zoom
LCD ON /OFF
Arrow keys
MENU/SELECT
LED lights
Microphone
To Next Page
Need help?
General
