Specifications are subject to change without notice.
© 2018 VTech Technologies Canada Ltd. All rights reserved.
08/18. VM3251-2_QSG_V3.
Document order number: 96-011462-020-100
Quick start guide
Go to www.vtechphones.com
for the latest VTech product news.
What’s in the box
VM3251 VM3251-2
• The rechargeable battery is pre-installed in your parent unit.
• Use only the power adapters supplied with this product.
• Make sure the baby monitor is not connected to the switch controlled electric outlet.
• Connect the power adapters in a vertical or floor mount p osition only. The adapters’ prongs are
not designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-
the-table, or cabinet outlets. Other wise, the adapters may not properly connect to the outlets.
• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.
2
Power on the baby monitor
Slide the ON/OFF switch to power
on your baby unit.
Press and hold to power on your
parent unit.
Caution
• The default volume of your parent unit
is level 3, and the maximum volume is
level 5. If you experience high-pitched
screeching noise from your baby
monitor while positioning:
- Make sure your baby unit and parent unit
are more than 1 meter (3 feet) apart, OR
- Turn down the volume of your parent unit.
Positioning the baby monitor
4
Status check
Once you power on both your baby unit and parent unit, your parent unit displays image
from the baby unit, and the LINK LED light turns on.
The POWER LED light of baby unit turns on.
Adjust speaker volume
Press VOL+ / VOL- to adjust your parent
unit speaker volume. It determines the
volume of sound transmitted from your
baby units.
Zoom
Press to zoom in or out.
Talk to your baby unit
Press and hold TALK and speak to your
parent unit. Your voice is transmitted to
the baby unit.
Turn off the parent unit
Press and hold to power off your
parent unit.
Use the menu
Press MENU to enter the menu, or save
a setting. You can use the parent unit for
advanced settings or operations, such as to
play or stop the baby unit lullaby.
While in the menu:
• Press
or to scroll among the menu
options.
• Press
to enter the desired submenu.
• Press
or to select an item.
• Press SELECT to confirm your selection.
Turn off the screen
Press LCD ON/OFF to switch off the
screen. You can still hear sound from the
selected baby unit.
Tip
• Press any keys on the parent unit to turn on
the screen again.
Basic operation - Parent unit
VM3251
VM3251-2
Video Monitor
2s
＜3ft (1m)
＞3ft (1m)
> 3ft (1m)
Press and hold
Submenu
Main menu
2s
To Next Page
Need help?
General
