40
may vary for different cell phones.
If this happens, follow the prompts
on your cell phone and your VS112-
17/ VS112-27/ VS112-37/ VS112-47 to
complete the pairing process.
• Refer to the user’s manual of your cell
phone on how to search for or add a
new Bluetooth device.
Add a Bluetooth headset
Before you begin, make sure that
your Bluetooth enabled headset is
not connected to any other Bluetooth
device. Refer to your headset user’s
manual to learn how to search for or add
new Bluetooth devices.
Pair and connect a headset
1. Press MENU/SELECT on the handset
in idle mode.
2. Press p/q to highlight Bluetooth,
then press MENU/SELECT.
3. Press p/q to highlight Add BT
headset, then press MENU/SELECT.
• The display shows Search
headset...
4. Set your headset to discoverable
mode (refer to the user’s manual
of your headset). When the screen
displays the found devices, press
p/q to highlight your headset, if
necessary, then press MENU/SELECT.
• Enter the PIN of your headset,
if required. The PIN for most
Bluetooth devices is 0000 (refer to
the user’s manual of your headset).
Press MENU/SELECT to continue.
NOTES
• The pairing process may take up to
one minute. If the pairing process
fails, try again.
• When a connected headset is
charging, it may disconnect from the
telephone base and the light
on the telephone base turns off. For
some headset models, you may need
to turn on the headset and reconnect
it to the telephone base again.
Review the Bluetooth device list
1. Press MENU/SELECT on the handset
in idle mode.
2. Press p/q to highlight Bluetooth,
then press MENU/SELECT.
3. Press MENU/SELECT again to select
Device list.
Download/Transfer your cell phone
phonebook entries via Bluetooth
You can download cell phone
phonebook entries to your VS112/
VS112-2/ VS112-3/ VS112-4 telephone
system via Bluetooth wireless
technology. Each downloaded cell
phone phonebook entry is stored in
the handset phonebook with up to 24
digits for each phone number and 15
characters for each name.
To Next Page
Loading...
Need help?
General
