VTech VS112-4 User Manual

73
Dial modes
Temporary tone dialing
If you have pulse (rotary) service only,
you can switch from pulse to touch-
tone dialing temporarily during a call.
This is useful if you need to send touch-
tone signals to access your telephone
banking or long distance services.
During a call
1. Press on the handset.
2. Use the dialing keys to enter the
relevant number. The telephone
sends touch-tone signals.
3. The telephone automatically returns
to pulse dialing after you end the
call.
Set dial mode
The dial mode is preset to tone dialing.
If you have pulse (rotary) service, you
must change the dial mode to pulse
dialing before using the telephone.
To set the dial mode
1. Press MENU/SELECT in idle mode.
2. Press p/q to highlight Settings,
then press MENU/SELECT.
3. Press p/q to highlight Dial mode,
then press MENU/SELECT .
4. Press p/q to choose Touch-tone or
Pulse, then press MENU/SELECT.
NOTE
• If you have dial pulse (rotary) dialing
service only, refer to Temporary tone
dialing to temporarily switch from
pulse to touch-tone dialing during a
call.
Ringer
Set ringer tone
You can select the ringer tones for
incoming home and cell calls.
To set the ring tone on home line
1. Press MENU/SELECT in idle mode.
2. Press p/q to highlight Ringers,
then press MENU/SELECT.
3. Press p/q to select Home ringtone,
then press MENU/SELECT.
4. Press p/q to sample each ring tone
for home line.
5. Press MENU/SELECT to save.
To set the ringer volume on cell lines
1. Press MENU/SELECT in idle mode.
2. Press p/q to highlight Ringers,
then press MENU/SELECT.
3. Press p/q to select Cell ringtone,
then press MENU/SELECT.
4. Press p/q to sample each ring tone
for cell lines.
5. Press MENU/SELECT to save.
NOTE
• When you turn off the ringer volume,
you will not hear ringer tone samples.

VTech VS112-4 Specifications

General

Brand	VTech
Model	VS112-4
Category	Cordless Telephone
Language	English