31
Conguring the Handset
You can congure the phone using one of two methods:
1. The Features and User settings menus on the phone.
2. The WebUI, which you access using your Internet browser.
This section describes settings you can change using your
handset. For information about the WebUI, see “WebUI” on
page 36.
The system administrator can congure additional settings,
including Network settings, Provisioning, and the PIN code
by using the Admin settings menu. For more information
about this menu, see the VSP600/VSP601 Administrator and
Provisioning Manual, available at
businessphones.vtech.com.
Setting do not disturb
When Do Not Disturb (DND) is on for a line, calls to that line will be rejected.
To turn DND on or off:
1. Press MENU.
2. Press q to scroll to Features and press SELECT.
3. With DND highlighted, press SELECT.
4. Press p or q to select which line DND should apply to,
then press SELECT to turn it on or off.
5. Press
SET
to save.
Setting call forwarding
Calls can be forwarded to another phone number always, only when busy, or
after a set number of rings.
To set call forward:
1. Press MENU.
2. Press q to scroll to Features and press SELECT.
3. Press q to scroll to Call forward and press SELECT.
4. Press p or q to select which line Call forward should apply to, then press
SELECT.
5. Press q to highlight the desired option:
• Always
• Busy
• No answer
6. Press SELECT.
7. On the next screen, press SELECT to turn call forwarding
'1'
/LQH
2Q
/LQH
2II
To Next Page
Loading...
Need help?
General
