Commissioning
7.1 Safety instructions for operation
26
Operator’s Manual | BPS | 5100060589 | 07/2021 | [us]
7 Commissioning
7.1 Safety instructions for operation
WARNING
Tipping hazard due to slipping or overturning machine!
At least 2/3 of the machine must be on a stable surface near edges.
► Take the machine out of operation and lift it back onto a stable sur-
face.
WARNING
Improper handling may result in injury or serious material damage.
► Please read and follow all safety instructions in this operator's man-
ual.
CAUTION
Health hazard due to vibrations!
Physical impairments due to vibration.
► Take regular breaks.
CAUTION
Risk of collapse and spillage!
There is a risk of injury from falling or spilling when working on fracture,
pit, dump and embankment edges, on trench edges and heels.
► Pay attention to side walls and their stability.
► Ensure stability.
Operation on inclined surfaces
NOTICE
Technical damage due to failure of engine lubrication!
► Do not exceed the maximum permissible inclination, see see Techni-
cal Data on page 42.
• Only approach gradients from below.
Ground conditions
The maximum dumping height depends on several factors of the ground
conditions. An exact specification of this value is not possible.
▪ Determine the maximum fill height by compaction tests or soil sam-
ples.
To Next Page
Loading...
Need help?
General
