Technical Data
13.1 General instructions
42
Operator’s Manual | BPS | 5100060589 | 07/2021 | [us]
13 Technical Data
13.1 General instructions
Information
For system technical reasons, empty columns can be displayed in the
technical data, and numbers and letters that written in superscript or sub-
script may be displayed incorrectly, e.g:
► Sound power level LWA instead of L
WA
► Sound pressure level LpA instead of L
pA
► Vibration total value ahv instead of a
hv
► Carbon dioxide CO2 instead of CO
2
► Unit m/s2 instead of m/s
2
13.2 Noise and vibration data
The noise and vibration data listed have been determined in accordance
with the following guidelines for the typical machine operating conditions /
special test conditions and using harmonized standards:
• Machinery Directive 2006/42/EC
• Noise Emission Directive 2000/14/EC
During operational use, values may differ depending on the prevailing op-
erating conditions.
Sound pressure level at operator station
• L
pA
was determined according to EN ISO 11201 and EN 500-4.
Guaranteed sound power level
• L
WA
was determined according to EN ISO 3744 and EN ISO -4.
Weighted vibration total value hand-arm vibration
• a
hv
was determined according to EN ISO 20643 and EN 500-4.
13.3 BPS
Type BPS1030Aw BPS1030A
Material number machine 5100058916 5100059658
Material number engine 5100045994 5100045994
Centrifugal force [kN] 10 10
Vibrations [Hz] 98 98
Vibrations [1/min] 5880 5880
Area output* [m2/h] 500 500
Flow [m/min] 26 26
Gradeability [%] 36.4 36.4
Length (drawbar in working position) [mm] 930 930
To Next Page
Loading...
Need help?
General
