Maintenance
Maintenance work 9.3
33
[us] | 07/2021 | 5100060589 | BPS | Operator’s Manual
Maintenance work daily monthly 100h 125h 300h 500h
Clean the machine.
• Visual check for complete-
ness.
• Visual check for damage.
●
Check engine oil fill level. ●
Check air filter intake area. ●
Check screw connections. ●
Clean fuel filter. ●
Clean and check air filter. ●
Check V-belt tension. ●
Clean the deposit cup. ●
Change engine oil. ●
Check spark plugs. ●
Check rubber buffer .* ●
Check valve clearance.* ●
Replace the fuel filter. ●
9.3 Maintenance work
Carrying out preparations:
1. Place the machine on a level surface.
2. Decommissioning the machine.
3. Let the machine cool down.
9.3.1 Cleaning the machine
Observe the following when cleaning the machine with a high-
pressure cleaner:
1. Do not aim high-pressure cleaner directly at air intake area and
electrical components.
2. Do not hold the high-pressure cleaner too close to the machine in
order to avoid damage to labels and sensitive components.
Visual check after cleaning:
1. Check cables, hoses and lines for leaks and chafe marks.
2. Check screw connections.
ð Replace damaged components.
3. Check all safety, warning and operating instructions for complete-
ness.
ð Replace missing or damaged labels and signs immediately.
9
To Next Page
Loading...
Need help?
General
