BPU 2440/2950 Repair General Information
wc_tx000264gb.fm 13
Never lift or transport the machine with its engine running.
3.7 Storage
Job Site Storage
Never allow the machine to sit overnight in a ditch, trench, or other low
area that may fill with water during heavy rain.
Long-term Storage
Before storing the unit for a long period of time, be sure it is in good
condition. The following steps are recommended before storing.
3.7.1 Completely drain the fuel tank. Run the engine until carburetor is dry.
3.7.2 Thoroughly clean exterior of plate and engine. Visually inspect the unit
for signs of damage, loose hardware, and worn shockmounts. Make
any necessary repair.
3.7.3 Change engine oil and exciter oil.
3.7.4 Clean area around spark plug and remove plug. Pour 1 ounce (30 ml)
of SAE 10W30 engine oil into engine cylinder through plug opening.
Crank engine slowly three or four times to distribute oil. Replace the
spark plug.
3.7.5 Store unit indoors in a clean dry area. If unit is to be stored outside,
wrap it with a quality tarpaulin.
CAUTION
CAUTION
To Next Page
Loading...
Need help?
General
