BPU 2440/2950 Repair Maintenance
wc_tx000328gb.fm 21
4.2 Maintenance Schedule
Daily
before
starting
Every
25
hrs.
Every
100
hrs.
Every
300
hrs.
Check engine oil level. •
Visually inspect exciter base for leaks. •
Inspect/clean air filter. Re-oil foam element;
replace as required.
•
Check/tighten external hardware. •
Change engine oil. •
Inspect/adjust V-belt. •
Check/regap spark plug. Replace when
nececessary.
•
Clean engine cylinder cooling fins. •
Inspect shockmounts. Replace if cracked
or split.
•
Change exciter oil. •
Chang hydraulic oil in handle. •
Change fuel filter or strainer. •
Clean combustion chamber. •
Check/adjust breaker point ignitions. •
Clean/rinse fuel tank. •
Clean rewind starter. •
For new or reconditioned engines
:
Check/adjust belt tension. After first 5 hours of operation.
Change engine oil. After first 10 hours of operation.
To Next Page
Loading...
Need help?
General
