Wacker Neuson BS 50-2 Repair Manual

Repair Engine and Upper Machine Components
wc_tx001546gb.fm 71
4.23 Replacing the Carburetor (WM 100 Engines)
Requirements
• Machine shut down and cool
• Loctite® 243 or equivalent
• Torque wrench
Removal
Perform the procedure below to remove the engine.
4.23.1 Disconnect the spark plug.
4.23.2 Remove the side guard
(a).
4.23.3 Disconnect the throttle cable
(b).
4.23.4 Disconnect the air hose
(c).
4.23.5 Disconnect the fuel hose
(d) and the compensation hose (h).
4.23.6 Disconnect the hose
(e).

Wacker Neuson BS 50-2 Specifications

General

Brand	Wacker Neuson
Model	BS 50-2
Category	Vibratory rammers & tampers
Language	English