9 Operation and use
18 100_0201_op_0001.fm
9 Operation and use
9.1 Initial commissioning
1. Place the spark plug cap on the spark plug.
9.2 Before commissioning
9.2.1 Inspection before commissioning
Check the machine and components for damage. In the event of visible damage, do not operate the
machine and immediately contact a Wacker Neuson dealer.
Ensure that loose packaging material has been removed from the machine.
Current regulations of the local authorities for noise emissions.
Fuel level.
Air filter.
Starter rope.
Grease.
Check the screwed connections for a secure seat.
9.3 Notes about operation
WARNING
Improper handling may result in injury or serious material damage.
Please read and follow all safety instructions in this operator's manual.
Item Designation
1 Spark plug cap
NOTICE
Perform checks according to the Maintenance chapter. If necessary, top off missing fuel,
lubricants and coolants, see chapter Technical Data.
WARNING
Danger of tipping
There is a serious risk of injury from slipping or tipping over of the machine.
Always secure the machine from tipping over.
Place the machine on level surface with a firm substrate.
DANGER
Danger of crushing
It is possible to crush hands and feet.
Work carefully.