5-6 BA D24 en/us* 1.0 * D24_1_0_500.fm
5 Operation
5.4 Machine travel
There are two different operating modes:
• Work mode
Includes all work, such as for moving earth, gravel, coarse gravel and
rubble.
• Road-travel mode
Designates machine travel on public roads. No work may be performed
in road-travel mode. In road-travel mode, specific measures must be
taken for preparing machine travel on public roads – see chapter “
Vehicle travel on public roads” on page 4-37.
Accident hazard due to incorrect adjustment of travel direction!
Can cause serious injury and death.
► Ensure that the surrounding area is clear.
► Set the forward-reverse control to the required position before starting
machine travel.
Accident hazard due to machine rolling away under its own weight!
Can cause serious injury and death.
► Change over the travel direction only if the machine is at a standstill
and if the service brake is actuated.
Accident hazard due to travel direction changeover during machine
travel!
Can cause serious injury and death.
► Change over the travel direction only if the machine is at a standstill
and if the service brake is actuated.
The forward-reverse control is located on the joystick on the right.
Fig. 105
Fig. 105 Symbolic photo
1
A
N
2
Travel direction Position
Forward 1
Neutral position N
Reverse 2
To Next Page
Loading...
Need help?
General
