2-8 BA D24 en/us* 1.0 * D24en_us_1_0_200c.fm
2 Safety
Stopping the engine of the vehicle
• Stop the engine only according to the Operator’s Manual.
• Before stopping the engine, lower the work equipment/attachment to
the ground.
Stopping and securing the vehicle
• Unbuckle the seat belt only after stopping the engine.
• Before leaving the machine, secure it to prevent it from rolling away
(for example with the parking brake, suitable wheel chocks).
• Remove the starting key and secure the vehicle against unauthorized
operation.
2.5 Lifting gear applications
Requirements
• Have loads fastened and the operator guided by a qualified person
who has specific knowledge of lifting gear applications and the usual
hand signals.
• The person giving instructions to the operator must stay in visual
contact with the operator when fastening, guiding or removing the load
(maintain visual contact).
• If this not be possible, ask one more person with the same qualifica-
tions to guide.
• The operator may not leave his seat as long as the load is raised.
To Next Page
Loading...
Need help?
General
