EH 23, 27 Transport
25
6 Transport
Transporting the machine
1. Pull the plug from the plug receptacle.
2. Remove tool.
3. Wind up the power cable.
4. Lift machine with the supplementary handle.
5. Place the machine on or into a suitable transport vehicle.
6. Secure the machine against falling over and down or sliding.
Note: Wacker Neuson recommends to use the truck for the transport on the
construction site, refer to chapter Accessories.
WARNING
Improper handling can result in injury or serious material damage.
f Read and follow all safety instructions of this operator's manual, see chapter
Safety information.
To Next Page
Loading...
Need help?
General
