Wacker Neuson EH 23 Low Vib User Manual

Maintenance EH 23, 27
34
Checking the tool holder for wear
1. Insert the tool.
Note: Use a new tool to measure only the wear of the tool holder and not the
wear of the tool.
2. Measure the tool play 200 mm from insertion point.
Play may not exceed 6 mm.
If the play exceeds 6 mm, the tool holder must be replaced.
Item Value
A 200 mm
B Max. 6 mm

Wacker Neuson EH 23 Low Vib Specifications

General

Brand	Wacker Neuson
Model	EH 23 Low Vib
Category	Power Tool
Language	English