8 © Wagner Spray Tech. All rights reserved.
English
2. Remove the uid nozzle.
3. Remove the material ow adjustment knob and spring.
Material Flow Adjustment Knob
Spring
4. Remove the needle.
IMPORTANT: If the needle does not slide out easily, loosen
the packing nut to prevent the needle or packing from being
damaged.
5. Install the new projector set in reverse order.
Optional Accessories
Part Number Description
0277090 Projector set, low air ow, #2A complete
0277091 Projector set, low air ow, #3A complete
0277092 Projector set, low air ow, #4A complete
0277093 Projector set, low air ow, #5A complete
0277094 Projector set, low air ow, #6A complete
0508124 Cover, clip-on, 1 quart
0279941 Deluxe tip accessory kit
0550962 17-Piece gun cleaning kit
0295267 Standard Low CFM Kit
NOTE: The “low air ow” projector sets and air caps are
suitable for low CFM compressors.
Repair Kits
Part Number Description
0297051 Check valve repair kit (Includes 3 assemblies)
0276257 Check valve membrane kit
(includes 10 membranes)
0297052 Gasket, cup, white (includes 6 gaskets)
0276258 Gasket, cup, Thiokol - black (includes 6 gaskets)
0277943 HVLP gun repair kit
Includes:
• front air valve seal
• rear air valve seal
• needle packing
• air control valve o-ring (2)
• check valve assembly
• check valve tube, short
• check valve tube, long
• cup gasket
Questions?
Call Wagner Technical Service at:
1-800-880-0993
Register your product online at:
www.wagnerspraytech.com
Proper registration will serve as proof
of purchase in the event your original
receipt becomes misplaced or lost.
To Next Page
Loading...
Need help?
General
