WAGNER Power Roller User Manual

10
English
• Thoroughly cleaning your unit and its components is the best way to ensure the prolonged life of your unit.
• Keep water, paint, and other residues away from the handle button. A clogged handle button will affect the
performance of your unit.
• Be sure that your unit is free from all fluids before storage. After storing your unit in extreme cold temperatures,
allow unit to reach room temperature before using.
•
When storing your unit, be sure the paint hose is stored in a large loop without any kinks. If it is bent, it could be
d
amaged.
IMPORTANT
The areas on the roller handle and the extension indicated
below must be cleaned thoroughly and lubricated after each
use. ALL paint should be removed from the areas highlighted
in gray below, especially the quick-release tabs and all other
areas that connect with other parts. This can be done by
using the appropriate cleaning solution and an old toothbrush
(DO NOT SUBMERGE ROLLER HANDLE!).
(Extension)
(Handle)
Quick-
release
tabs
Connecting
area
Connecting
area
Quick-
release
tabs
In addition to thoroughly cleaning your unit after every use,
you must
CLEAN and LUBRICATE the areas on the arm (a,
b, c)
, extension (d), and the Quick-clean™ inlet plug O-rings
(e) indicated below. Use a thin layer of petroleum jelly to
lubricate the indicated areas.
NOTE - DO NOT attempt to remove the Quick-clean™ inlet
plug O-rings, and make sure not to lose the Quick-clean™
inlet washer.
(c)
(a)
(b)
(d)
(e)
Cleaning and Storage Tips
Maintenance

WAGNER Power Roller Specifications

General

Brand	WAGNER
Model	Power Roller
Category	Power Roller
Language	English