GB
11
Important Note Regarding Product Liability!
Using other accessories and spare parts can lead to partial or total loss of liability and
guarantee claims. With original WAGNER accessories and spare parts, you have the
guarantee that all safety regulations are fulfilled.
W 180P
Malfunction Cause Correction
Spray gun buzzes and does Piston stuck Disassemble pump and
not work clean with thinner
Defective drive Send spray gun to customer
service center
Spray gun does not suck in No valve in the pump Insert valve
Suction tube loose in the conical
bore Adjust suction tube
Venting hole in pump housing
clogged Clean
Intake hole (fitting) in pump
housing logged Clean
Viscosity of spray material too high Thin accordingly
Spray gun sucks in but does Nozzle clogged Clean
not spray Ducts and holes in atomiser clogged Clean
Spray gun works but sprays Spray material in container running
unevenly out Refill
Spray gun held inclined leading to Use flexible nozzle
sucking in of air extension (see accessories)
Viscosity of spray material too high
(too thick) Dilute accordingly
Fine adjustment button not set Reset according to spray
correctly material
Wrong nozzle size Change nozzle
Nozzle worn out Replace
Valve worn out Replace
Wrong valve inserted Use correct valve
To Next Page
Loading...
Need help?
General
