2.0 INFORMATION REGARDING SAFETY
VM
2
TOR.VM.--.M.A.0518.EN Issue: A
05.18
7
Before starting with installation, a “Safety Plan” must be implemented to safeguard the personnel di-
rectly involved and those who carry out operations in the surrounding area.
All the laws must be strictly applied, especially those concerning workplace safety.
Before proceeding with installation operations, mark o the work area to prevent access by unauthor-
ized persons.
The electrical connections must be made in compliance with the standards and laws in force.
The person in charge of making the electrical connections has to ensure that the required standards
and laws are respected before testing.
2.3 Safety prescriptions for installation
2.4 Safety prescriptions for use and operation
Do not tamper with the valve concerned by using any kind of device to obtain performances dierent
from those designed.
All unauthorized changes can aect the health of people and the integrity of the valve.
The operators have to exclusively wear protective clothing and have to be equipped with appropriate
individual protection devices for carrying out the operations and as required by the safety and work
accident prevention standards.
Before use, ensure that all the safety devices are installed and that they are working properly.
During operations, prevent access to the work area by unauthorized persons.
Remove all obstacles or sources of danger from the work area.
It is strictly forbidden placing any improper load on the valve.
To Next Page
Loading...
Need help?
General
