1.0 GENERAL INFORMATION
VM
2
TOR.VM.--.M.A.0518.EN Issue: A
05.18
4
Important
Do not change the data on the identication plate.
Keep the ID plates clean, intact and legible as regards the data they contain.
If the ID plate is damaged or is no longer legible (even just one informative element on it) contact the
Manufacturer for a new ID plate and replace it.
1.4 Manufacturer’s data and identication of the valve
1.5 Request for assistance
1.6 Warranty
For all technical assistance, contact the Manufacturer’s service network.
For all requests, provide the valve identication data, the type of problem encountered and all other information
which could be useful for identifying the problem.
The conditions for validity and applicability of the warranty are specied in the sales contract.
The ID plates shown identify the equipment concerned and its main components.
The plates show the reference necessary for operating safety.
R
R
MEMBER OF
WAMGROUP
R
41030 S.Prospero (MO)
ITALY
Via Canaletto, 139/A
+39/0598080811
TOREX SpA
R
Type:
VM
Year:
2018
Operating pressure max 3.5 bar
Controll pressure max 6 bar
Differential pressure 2 to 2.5 bar
Batch No: 22- 11- 18- 09
1
2
3
4
5
6
1) Manufacturer’s name and address
2) Serial No.
3) Machine model
4) Max. operation pressure
5) Max. closing pressure
6) Dierential pressure meter
To Next Page
Loading...
Need help?
General
