Installation
Safety Precautions
Never let children operate or play with door controls. Keep remote controls away from
children. Fatal injury could result should a child become trapped between the door and the
floor.
Always keep moving door in sight and keep people and objects away until it is completely
closed. To prevent serious injury or death, avoid standing in the open doorway or walking
through the doorway while door is moving.
Warning
Definition of Symbol
2
Warning/Glossary
Copy – See Replicate.
Delete – Erase transmitter or SCENE information from Controller. Also known as Exclude.
Device – Any item that is connected to a module (for example, lamps).
Exclude – Remove a module from the controller.
Include – Add a module to the controller.
Module – Any HomeSettings or Z-Wave® product that is controlled with a HomeSettings or
Z-Wave® remote controller. A module can be part of more than one scene.
Network – A collection of devices controlled by primary or secondary controllers operating on the
same system. A network has its own unique identification code so that no one else can control
the system.
Operator – Garage Door Opener
Primary Controller – The first controller used to set up your modules and network.
NOTE: Only the Primary Controller can be used to include or delete modules from a
network. It is recommended that you mark the primary controller for ease in modifying
your network.
Replicate – Copy from one controller to another.
Scene – A scene is a series of Z-Wave® modules programmed to turn to a specific level (on, off,
dim) with the push of a button on a controller.
Secondary Controller – A controller containing network information about other modules within
the network, and is created FROM the primary controller. Secondary controllers cannot include or
delete modules to the network.
Transmitter – Garage Door Opener transmitter
GLOSSARY
To Next Page
Loading...
Need help?
General