Webasto FCF Series User Manual

Operation
Digital Display Operation
• Don't install the digital display in a location where it can get wet.
• Don’t knock, throw or open the digital display.
1. Remote receiver 6. Fan control button
2. Display 7. Temp. Setting button (Increasing)
3. Fan speed display (HIGH-MID-LOW and AUTO speed) 8. Temp. Setting button (Decreasing)
4. Display of mode operation (COOL-DEHUMIDIFY-HEAT and AUTO) 9. ON/OFF button
5. Mode button
The digital display has a built in memory function that’s will retain the last modes settings. Settings include
operation mode, set temperature, operation fan speed, and the temperature display format.
In cooling / heating / dehumidify mode, the pump starts before the compressor starts, stops
after a 5 second delay of the compressor.

Webasto FCF Series Specifications

General

Brand	Webasto
Model	FCF Series
Category	Air Conditioner
Language	English