5.3.3 Removing and fitting the suction panel
For your safety when using the combi oven
Before starting work, it is essential that you familiarize yourself with the rules and hazard warnings
specified in the chapter '
For your safety on page 13' and in this instruction manual, and follow the in‐
structions given there.
Prior knowledge required
You need to know these operations:
■
Opening and closing the appliance door safely
33
■
Inserting and removing racks 39
Materials required
Wide flat-blade screwdriver
Requirements
■
The appliance is off and entirely without power.
■
The cooking chamber has cooled down to < 60 °C after its last use.
■
The left-hand rack has been removed.
Removing the suction panel
1.
Use the tool to release the fasteners, top and bottom.
2.
■
Pull the suction panel away slightly from the securing
studs at top and bottom.
■
Detach the suction panel from the rear fixing stud and
take it out of the cooking chamber.
5 Cleaning procedures
User manual 61
To Next Page
Loading...
Need help?
General