Directions for use 37
Maintenance
Maintain the monitor and cuff
The monitor does not require calibration.
To get the best performance from your
monitor, follow the maintenance steps
below.
• Store the unit in a dry place away
from direct sunlight.
• Avoid shaking and dropping the
monitor.
• Avoid operating the monitor in dusty
and unstable temperature
environments.
Cleaning
1. Clean the monitor only when
necessary with one of the following
compatible cleaning agents:
• 70% isopropyl alcohol
• 10% chlorine bleach/90% water
solution (standard bleach wipe)
2. If necessary, you may wipe the cuff
with a soft, damp cloth.
Caution Use a soft cloth to clean
the entire unit. Do not use any
abrasive or volatile cleaners.
To Next Page
Loading...
Need help?
General
